Ventara Breathe ceiling mounted heat recovery ventilator

Ventara’s ceiling-suspended heat recovery units provide a smarter, more energy-efficient way to ventilate buildings. By continuously supplying fresh, filtered air while recovering valuable heat from extracted air, these systems help lower energy bills, reduce condensation and improve indoor air quality. Designed for discreet installation within ceiling voids, they deliver year-round comfort, creating healthier, fresher environments for occupants while helping building owners reduce long-term running costs.

Ventara Breathe ceiling mounted unit connected to four ducts
rated airflow across seven sizes
150 to 1,000m³/h
maximum temperature efficiency
90%
DC motor fan speeds
10

Find the Breathe size for your airflow

The finder compares rated airflow only. Enter your design airflow or tap a model. Your ventilation designer must also check external pressure before selecting a unit.

300 m³/h = 83.3 l/s = 176.6 CFM

Smallest rated-airflow match. Pressure check required.

Breathe 350

Rated airflow
350 m³/h
97.22 l/s
External pressure
160 Pa
Temperature efficiency
80 to 89%
Noise
32 dB(A)
Input power
140 W
Casing A × B × C
884 × 874 × 331 mm
Net weight
30 kg

Rated figures for each Breathe model. Check duct resistance against each model's external pressure with your ventilation designer before ordering.

Who Breathe is for

Breathe is for buildings with a ceiling void that can take ducts. Match its rated airflow and external pressure to your ventilation design.

No ceiling void for ducts? A single room heat recovery unit uses one opening in an outside wall.

Ventara Breathe with the access panel open showing the heat exchanger core
  • Total heat exchanger

    A fifth-generation total heat exchanger recovers heat and moisture from the extract air.

  • Auto bypass

    Auto bypass switches between heat exchange and bypass by outdoor temperature. It brings fresh air straight in when recovery is not wanted.

  • Ten-speed DC motor

    A plastic encapsulated DC motor with ten speeds.

  • Filtration

    The Breathe sheet lists G3 primary and F7 medium filter options. Ask which filters are supplied with your unit.

  • Options

    Breathe options include a humidity sensor, a CO₂ sensor, a smart air quality detector and a Wi-Fi module for Android and iOS control. Ask which options are in UK and Irish stock.

  • Smart controller

    Heat recovery, auto, sleep and bypass modes. Smart mode prevents frosting below -5°C and runs intermittently below -15°C. Airflow compensation adjusts for clogged filters.

  • Airtight casing

    Sealed triple folded edges stiffen the housing and keep it airtight. The casing supports parallel airflow, inverted installation and reserved side ports for outside and exhaust air.

What does Breathe cost to run?

Pick a setting and the hours it runs. The cost uses the catalogue power figure and the current Ofgem price cap rate of 26.32p per kWh.

Model

£39.00a year

£3.25 a month · 148 kWh a year

Uses the catalogue rated input power for each model. Actual use depends on fan speed and run time. Estimate at the Ofgem price cap average electricity unit rate for 1 October to 31 December 2026 (standard variable tariff, Direct Debit, Great Britain average). The government has removed VAT from electricity bills from 1 October 2026 to 31 March 2027. Standing charge not included. Your rate depends on your region and tariff. Source: Ofgem, 26 August 2026 (opens in a new tab).

Breathe specifications

ModelRated airflow (m³/h)Rated airflow (l/s)External pressure (Pa)Enthalpy eff. cooling (%)Enthalpy eff. heating (%)Temperature eff. (%)Noise dB(A)Input power (W)Net weight (kg)
Breathe 15015041.679571 to 7973 to 7980 to 84295820
Breathe 25025069.448568 to 8370 to 8379 to 86286223
Breathe 35035097.2216071 to 8272 to 8480 to 893214030
Breathe 500500138.8912067 to 8269 to 8378 to 873416533
Breathe 650650180.5612066 to 8169 to 8277 to 863525238
Breathe 800800222.2215070 to 8171 to 8279 to 853533548
Breathe 10001,000277.7817071 to 8673 to 8780 to 903742054

Scroll the table sideways for noise, power and weight. The model column stays put.

All Breathe models run on 220 to 240 V.

Installing Breathe

  • Hang from four lifting lugs on suspension rods in the ceiling void. Leave the reserved access space shown on the dimension drawing: 600 mm clearance with a 450 x 450 mm opening.
  • Connect four ducts: outside air (OA), supply air (SA), return air (RA) and exhaust air (EA). Insulate the ducts marked on the installation drawing.
  • Install the unit inverted where the layout needs it. Reserved side ports take the outside and exhaust air.

Breathe is supplied in the UK and Ireland by Fresh Air Supplies. See Ventara Breathe 150 at Fresh Air Supplies (opens in a new tab).

  • Ventara Breathe with the access panel open showing the heat exchanger core
  • Two total heat exchanger cores from a Ventara Breathe unit
  • Ventara Breathe unit installed above an open-plan office ceiling
  • Ventara Breathe wall controller showing temperature and time
  • Close-up of the Ventara Breathe electrical box and duct spigot

Breathe questions

Which Breathe size do I need?

Pick the model whose rated airflow meets the design airflow for the building at the external pressure your duct run needs. Use the size finder on this page and check the choice with your ventilation designer.

What does auto bypass do?

Auto bypass lets Ventara Breathe bring fresh air in without passing it through the heat exchanger. The unit switches between heat exchange and bypass based on the outdoor temperature. Bypass is also one of the four listed modes.

Can it run in very cold weather?

Yes. Ventara Breathe has a low temperature routine in smart mode. It prevents frosting below -5°C and switches to intermittent operation below -15°C. Airflow compensation also adjusts for clogged filters and heat exchangers.